Two Stories Coming Soon: #NASAsocial Experience and AMSAT/ARRL Social Media Failures

I’ve been in the middle of a job change, and so I’ve neglected my duties here in corresponding with you, gentle reader. It doesn’t mean that I haven’t anything to say, just that I’ve not had made the time in which to say it.

I’ve been working on two separate, but related, pieces concerning my trip to Wallops Flight Facility to participate in the #NASAsocial program. One of these is strictly about the launch experience itself and what I experienced as a #NASAsocialite. The second, and what will perhaps be a bit more controversial, piece centers around my preparatory work I attempted before I even left to go- enlisting the help of the ARRL and AMSAT in helping to brief me about any amateur radio questions or protocols for being the very best ambassador to the various people I may, or may not, encounter. I’d like to give a shout out to Kay Craigie, N3KN, who actually took the time to respond to my query and point me in the right direction- she has more class in her little finger than probably exists within 1 square mile of anywhere I happen to be at the moment. But the rest of that story isn’t as upbeat, and it will possibly shed a little bit of light on why AMSAT membership in particular is declining, and why it’s probably going to eventually go the way of the dinosaur sooner rather than later.

Next month will be the sad story first- how Sean Kutzko, KX9X, missed the opportunity to get a first hand account and instead has continued to point out that satellites were destroyed in the failed launch but couldn’t be bothered to discuss this with me before the event itself (that is, it only became “news” when the launch failed). As the public media relations person for the ARRL, I was incredibly surprised at his lack of a response to a simple query. Then I’ll turn my attention to Barry Baines, WD4ASW, president of AMSAT, condescending email to me which was only written after complaining on Twitter about the lack of any help from an organization of which I was a member (I won’t be renewing) to find the people to ask and get a story, which, I don’t know, could have been published in the AMSAT Journal.

But then, the good news- why you should apply for social media credentials and participate in the #NASAsocial program. I met some really cool people, saw some very neat things, and realized that there is a great deal more science going on that, until that trip, I simply had no idea existed. While I think it’s fair to make the criticism that with amateur or armchair “journalists” you’ll end up with that sort of reporting, it would be rash to stop the discussion at that point. I met a couple of people who really used their social media chops and reached out and told a story to their audiences that may be just as good as anything else you might come across. Check out @nechton on Twitter- his pictures really told the story of the Antares #NASAsocial media experience. There are others, too- and I’ll make sure to point you to them.

Wallops Flight Facility Toolboxes and Workbenches

Recently, I got the chance to participate as a NASA Social Media Commentator for the Antares launch from Wallops Flight Facility, VA. As you have no doubt heard, the flight did not go as expected and some, as yet to be determined, anomaly caused the vehicle to crash. It will be some time before any real reasons reveal the cause of the launch vehicle failure. So, in the meantime, please enjoy my collection of photos I’m posting of the different toolboxes and workbenches I saw around the facility on my tour.

If I learned a lesson, it’s that I need a new camera. Please enjoy the blur!

Sounding Rocket Foundry Toolbox
Sounding Rocket Foundry Toolbox
Wallops Machine Shop Rolling Toolbox
Wallops Machine Shop Rolling Toolbox
Union Toolbox
Union Shop on Wallops was clean, efficient and productive! Go 1752!
If it needs a connection, the Ballooning Lab can solder any wire any way!
If it needs a connection, the Ballooning Lab can solder any wire, any way!
Not so fast! This stuff is waiting to get back in calibration and back to use! To use the vernacular, "these balloonists are no joke, yo."
Not so fast! This stuff is waiting to get back in calibration and back to use! To use the vernacular, “these balloonists are no joke, yo.”
You know how you just gush if you see cats in funny poses on the Internet? Well, that's what was happening here, except it wasn't cats, but instead balloonist storage bins.
You know how you just gush if you see cats in funny poses on the Internet? Well, that’s what was happening here, except it wasn’t cats, but instead balloonist storage bins.
Safety is no joke at Wallops. These bins were everywhere around tools, things that make noise, or really just anything that was super loud, fast and could ruin your day. Put these puppies on, kids.
Safety is no joke at Wallops. These bins were everywhere around tools, things that make noise, or really just anything that was super loud, fast and could ruin your day. Put these puppies on, kids.
Need to work on the go? Then why not use a rolling cart to move your tools and work around the shop floor?
Need to work on the go? Then why not use a rolling cart to move your tools and work around the shop floor?